Then put the glue in the electric furnace to dry, then take out the horizontal core from the furnace, remove the glass ribbon on the rod body, after trimming, polishing, drawing paint, and assembling, it becomes a fishing rod. Therefore, the real carbon fiber cloth has only warp threads and no weft threads. That's thick. Open the back cover to see clearly The inside of the tube wall has a mesh pattern, the texture is rough, and the color is dark black, and the outside of the tube wall has no pattern, the texture is fine, and the color is silver gray.

The shrinkage length is 58 About centimeters. according to their materials. The manufacturing process of the carbon fiber rod is the same as that of the glass fiber rod. The above is the identification method of carbon rod, I hope it will help you. The shrinkage length of the pocket pole is longer than the fiberglass pole, generally about 70 cm, and the diameter is also very thin. There are two kinds of semi-carbon rods: one is to attach the carbon fiber cloth to the outside of the glass fiber cloth and roll it on the core. After the rod is finished, the inside is glass fiber cloth and the outside is carbon fiber cloth. Sometimes you can see some net-like patterns on the body of the carbon fiber rod, which is printed on the lining cloth by resin offset, which is completely different from the obvious vertical and horizontal weave of the glass fiber cloth.

The pocket rods are the same as ordinary fiberglass rods. The other is to make the first few sections that are easily broken with full carbon cloth, and the last few sections with glass fiber cloth. This kind of rod not only has the advantages of carbon fiber rods, but also reduces the production cost and selling price.There are many kinds of fishing rod equipment, which can be divided into glass rods, carbon rods, bamboo rods, etc.

The carbon fiber is made of polyacrylonitrile fiber (PAN) or the pitch is drawn into silk, and the carbonized fiber is made at high temperature. Therefore, it is better to choose a threaded rod when buying a rod. The dipped cloth is cut into a trapezoid with a wide end and a fishing line spooler narrow end and is rolled on a conical steel core, and then a transparent glass ribbon is used to spiral it from the beginning to the end. Carbon fiber has the characteristics of high strength, high temperature resistance, corrosion resistance, abrasion resistance, etc.

Because the cloth that has just been dipped in glue is soft and the glass ribbon is tightly wound, the rod body is squeezed into an uneven spiral instead of carbon fiber cloth or glass fiber cloth. At present, the carbon fiber in the domestic fishing gear market is divided into full carbon and semi-carbon. Such rods are usually thicker. Some fishing rods seem to be smooth on the surface. Workers carelessly grind the pipe wall too thin, so the quality of the rod is too bad., and good electrical conductivity.